|
|
|
|
 tera low 4:1
#771953
12/13/06 10:40 PM
|
|
Anonymous
Unregistered
|
im looking to upgrade my stock NP231 with the tera-low 4:1, but i also am putting in a slip yoke eliminator with a longer rear CV drive shaft. are the SYE and tera-low gears compatible?
|
|
|
Re: tera low 4:1
#771954
12/15/06 03:56 PM
|
Joined: Aug 2005
Posts: 118
Wheeler
|
im looking to upgrade my stock NP231 with the tera-low 4:1, but i also am putting in a slip yoke eliminator with a longer rear CV drive shaft. are the SYE and tera-low gears compatible? Don't know, I would suggest giving them a call at 801-713-3314. There very knowledgable on Heeps, that is afterall probably 90% or better of their business.
|
|
|
Re: tera low 4:1
#771955
12/18/06 02:14 AM
|
Joined: Feb 2006
Posts: 42
Getting the Wheeling Fever
|
yes! you can buy a t-case from quadratec already done up <img src="/forums/images/graemlins/cheers.gif" alt="" />
05 rubicon rustys 3 in susp and ther stuff
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 14 (0.004s) Memory: 0.5907 MB (Peak: 0.6436 MB) Data Comp: Off Server Time: 2026-05-29 17:12:38 UTCValid HTML 5 and Valid CSS 
