Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
3.4 liter performance intake? #775274 12/26/06 05:41 PM
Joined: Aug 2005
Posts: 229
K
Kutter Offline OP
Wheeler
I am going to put an after market itake on my runner and I am interested in opinions on different performance intake systems for the 3.4. Things like actual performance increase, and how did the intake affect the noise level, fuel performance, etc.

Thanks


1995 4Runner Limited V6 3.4 Liter 5 Speed 4x4
1995 4Runner V6 Auto 2WD

Re: 3.4 liter performance intake? [Re: Kutter] #775275 12/26/06 06:59 PM
Joined: Aug 2003
Posts: 2,854
G
Greg_Canada Offline
Roll Me Over


89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
Re: 3.4 liter performance intake? [Re: Greg_Canada] #775276 12/27/06 12:38 AM
Joined: Oct 2004
Posts: 1,270
willzrunna96 Offline
Body Damage is Cool
search for deckplate mod and isr mod, both very good mods for under 20 bucks that will have the same affect as a 200 intake.. noise is louder but i like the sound of the intake, esp, with a trd filter


91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders
Re: 3.4 liter performance intake? [Re: willzrunna96] #775277 12/29/06 07:55 PM
Joined: Aug 2005
Posts: 229
K
Kutter Offline OP
Wheeler
Thanks
I guess I will live with what I have until it is time to turbo charge in late 2007.


1995 4Runner Limited V6 3.4 Liter 5 Speed 4x4
1995 4Runner V6 Auto 2WD

Re: 3.4 liter performance intake? [Re: Kutter] #775278 01/02/07 07:21 AM
Joined: Dec 2004
Posts: 73
D
dsalvetti Offline
Getting the Wheeling Fever
I read a lot about this when I was looking into an intake upgrade and learned that the deck-plate mod and the Intake Silencer Removal (ISR) performed just about as well as anything out there and it only costs about $20 and about an hour of your time.

~Dave


'98 4Runner SR5, 3.4L, 5-Speed, 4WD >>K&N, ISR, TRD Clutch, 265/75R16 Yokohoma Geolandar AT+II's, OME (880/N91SC, 906/N86C)>> SOLD to pay bills.

Moderated by  4x4Wire, Adam F, Dandeman, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.003s) Memory: 0.6038 MB (Peak: 0.6673 MB) Data Comp: Off Server Time: 2026-05-29 18:48:28 UTC
Valid HTML 5 and Valid CSS