Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
how wide is a full width axle? #780814 01/17/07 04:02 AM
Joined: Feb 2006
Posts: 45
R
roadayo1 Offline OP
Getting the Wheeling Fever
I was just wondering how wide a front full size axle? I know there are a lot of differnent widths but give me some idea thanks in advance.

Re: how wide is a full width axle? [Re: roadayo1] #780815 01/17/07 04:05 AM
Joined: Jan 2003
Posts: 551
R
Rodeo Clown Offline
Rock Warrior
The full width chevy's are about 67" to 69" WMS-WMS. IIRC


1997 Isuzu Rodeo - Auto - 31" ATs
1995 Honda Passport - 1 tons - 39" Boggers
Re: how wide is a full width axle? [Re: Rodeo Clown] #780816 01/17/07 04:37 AM
Joined: Jan 2000
Posts: 1,656
M
matthew Offline
Body Damage is Cool
dodges are usually 67" - like front D44's and D60's

Chevy and fords fronts are "usually" 69"........rear axles.......like vans can be as wide as 72"


to add some isuzu tech <img src="/forums/images/graemlins/smile.gif" alt="" /> you can run 2" wheel spacers on a rear 1996+ trooper 12 bolt rear to make it 67".... AKA full width


'93 RS 3.2L - DD/trail build
'97 7.3L Powerstroke - tow rig
'71 FJ40 - V-8, nv4500, atlas, D60, 14B - current build

Owner: http://www.INDEPENDENT4x.com

m-f 9am-6pm EST. 804-550-0480
Re: how wide is a full width axle? [Re: matthew] #780817 01/17/07 02:49 PM
Joined: Dec 2001
Posts: 5,911
Smiley Offline
Trail Leader
Quote
to add some isuzu tech <img src="/forums/images/graemlins/smile.gif" alt="" /> you can run 2" wheel spacers on a rear 1996+ trooper 12 bolt rear to make it 67".... AKA full width

The same trick would work on a 1996-97 Rodeo leaf-sprung Dana 44 too.
(It's a bit wider than the earlier Rodeo D-44s)


<img src="/forums/images/graemlins/cheers.gif" alt="" />
<img src="/forums/images/graemlins/smile.gif" alt="" />


Six Isuzus, so far... still have three of them.
Re: how wide is a full width axle? [Re: Smiley] #780818 01/18/07 07:10 PM
Joined: Nov 2005
Posts: 259
Baldy Offline
Mudrunner
I am running full width axles on my Dodge D-50. Front is a high pinion Dana 44 from a 78 Ford F-150. It is 65" wide from WMS to WMS.
The rear is a Chevy 12 bolt. It's width is 62" wide from WMS to WMS. I run 1 1/2" wheel spacers on the rear to make up the difference.
It all fit under my rig and with fender flares it looks pretty good.
[Linked Image]
[Linked Image]
[Linked Image]








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.003s) Memory: 0.6069 MB (Peak: 0.6713 MB) Data Comp: Off Server Time: 2026-05-29 22:23:05 UTC
Valid HTML 5 and Valid CSS