|
|
|
|
Help Replace "shift on the fly" with old aisin hubs - Axle fix?
#782847
01/24/07 07:30 AM
|
Joined: Jun 2006
Posts: 20
OP
Need a Spot
|
The process is slow... I finally build in an Ironman suspension. Lifted quite a bit. (X-mas present from me to me!) Now on the Isuzu Wizzard/Frontier/Rodeo I have baught AISIN lockers from a car breaker. "Repaired" it. Installed it temporary (Still need to seal it off, no gasket yet). Now i have to permanantly lock the vacuum actuater gadget underneath. Is there some help hints suggestions? Thanks
Maintenace is high but woth it. Isuzu goes places!
|
|
Re: Help Replace "shift on the fly" with old aisin hubs - Axle fix?
[Re: Richard Saylor]
#782849
01/25/07 09:03 AM
|
Joined: Jun 2006
Posts: 20
OP
Need a Spot
|
Yip. thanks. Will attept it on Saturday. how do I attach pics to the e-mail? Would like to send some when done.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 2.977s Queries: 15 (0.003s) Memory: 0.5972 MB (Peak: 0.6507 MB) Data Comp: Off Server Time: 2026-06-07 13:05:01 UTCValid HTML 5 and Valid CSS