|
|
|
|
 Rollcage
#799087
03/21/07 06:56 PM
|
Joined: Feb 2004
Posts: 137
OP
Wheeler
|
I'm starting the process of building myself a rollcage, as the stock bar just isn't safe. From people that have built their own, what have you used for tubing? I'm thinking 1 3/4 DOM .120 wall. Any advie for frame tie-ins or anything else I should watch for? I have access to a bender and have all the welding equipment I'll need so that won't be a problem. Let me know what you think people.
77 CJ-7 258 31" MTR's - now...
360, TF727, DANA 300, DANA 44's all sitting in the garage just waiting...
|
|
|
Re: Rollcage
[Re: kc77cj7]
#799088
03/22/07 03:57 PM
|
Joined: Oct 1999
Posts: 2,211
Body Damage is Cool
|
Trust designs that have been rolled and hold up.
Don't mess around with cage work, before finish welding, have some additional sets of eyes look to see if it looks safe and designed well.
SD
|
|
|
Re: Rollcage
[Re: superdawg]
#799089
03/23/07 08:17 AM
|
Joined: Feb 2004
Posts: 137
OP
Wheeler
|
Thanx SD. A good buddy of mine builds 'em for race cars and I'll have him take a look before I finish it.
77 CJ-7 258 31" MTR's - now...
360, TF727, DANA 300, DANA 44's all sitting in the garage just waiting...
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.005s) Memory: 0.5910 MB (Peak: 0.6439 MB) Data Comp: Off Server Time: 2026-06-17 04:09:01 UTCValid HTML 5 and Valid CSS