|
|
|
|
 1984 mitsu pickup w/5sp -- will 4d56t fit easily?
#800097
03/25/07 06:54 AM
|
Joined: Mar 2007
Posts: 1
OP
Need a Spot
|
hi i have an 84 mitsu pickup with a 4d55t. I'm wondering if i could transplant a 4d56t engine when this one gives out. Does a 4d56 engine have the same engine mounts, will it fit the 5spd trans? need different radiator? anyone tried it yet?
thanks,
p
|
|
|
Re: 1984 mitsu pickup w/5sp -- will 4d56t fit easily?
[Re: peteyd]
#800098
04/23/07 02:37 AM
|
Joined: Apr 2007
Posts: 7
Need a Spot
|
I read at www.pocuk.com/forums that the 4d56t is basically the stroked version of the 4d55t(which originaly came in the mitsu). What motor do you have in your mistu?
|
|
|
Re: 1984 mitsu pickup w/5sp -- will 4d56t fit easily?
[Re: peteyd]
#800099
04/23/07 04:49 AM
|
Joined: Apr 2006
Posts: 1,412
Body Damage is Cool
|
Not sure about the mounts and such, but the 4D56T will be taller due to the intercooler being on top of the engine.
1991 Mitsubishi Pajero XP TD LWB family hauler.
|
|
|
Re: 1984 mitsu pickup w/5sp -- will 4d56t fit easily?
[Re: redbull]
#800100
04/23/07 06:13 AM
|
Joined: Apr 2007
Posts: 7
Need a Spot
|
That is depending on the year of course. You could always relocate the intercooler to another spot. Just takes a little fabricating which comes along with any swap.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5988 MB (Peak: 0.6536 MB) Data Comp: Off Server Time: 2026-06-07 05:43:02 UTCValid HTML 5 and Valid CSS 