|
|
|
|
 02 3.4 Thermostat giggle valve
#802930
04/05/07 10:50 PM
|
Joined: Jul 2004
Posts: 44
OP
Getting the Wheeling Fever
|
I had always thought the giggle vavle was supposed to be indexed at 12oclock. My origional unit was facing 6 oclock. I looked as the fsm page but the 03 diagram looks like it is facing the side and using 2 bolts mine faces front and uses 3 bolts for the housing. Any thoughts? Thanks Curt
02TRDexcab,gray wire mod,magnaflow,PIAA,dog 
|
|
|
Re: 02 3.4 Thermostat giggle valve
[Re: taco99]
#802931
04/05/07 10:57 PM
|
Joined: Jul 2004
Posts: 44
OP
Getting the Wheeling Fever
|
found it if it is the same as the 2000 states giggle valve down. Always thought it was up to let any air pass if necessary. Thanks Curt
02TRDexcab,gray wire mod,magnaflow,PIAA,dog
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.005s) Memory: 0.5873 MB (Peak: 0.6350 MB) Data Comp: Off Server Time: 2026-06-07 09:10:24 UTCValid HTML 5 and Valid CSS 
