Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Master Cylinder #808547 04/27/07 11:12 PM
Joined: Feb 2001
Posts: 240
T
trav Offline OP
Wheeler
Anyone running a larger master cylinder on their 98+ rodeo or amigo? Is this the same master as on troopers? Just wondered what people are doing to get rid of the soft brake peddle when doing an SAS?


1998 Isuzu Rodeo -- slightly modified.
Re: Master Cylinder [Re: trav] #808548 04/27/07 11:28 PM
Joined: Sep 2000
Posts: 4,277
RobG Offline
Roll Me Over
on the 1st gens, its generally not a problem as long as all you're changing is the front axle. That said, I'm running a Chevy 1-ton MC on my 1st gen Rodeo... I don't know anyone thats done this swap on a 2nd gen, but it wasn't exactly a bolt up job for me either.

-Rob








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.019s Queries: 15 (0.017s) Memory: 0.5860 MB (Peak: 0.6341 MB) Data Comp: Off Server Time: 2026-07-15 02:06:08 UTC
Valid HTML 5 and Valid CSS