|
|
 Re: New Rollers
[Re: bretwalda]
#809568
05/03/07 09:02 PM
|
Joined: Apr 2002
Posts: 3,622
OP
Roll Me Over
|
Any rub on the front insides? I made a cardboard template to mock up the cross section of the wheel. I then played around with the offsets until it was just right. <img src="/forums/images/graemlins/smile.gif" alt="" /> The tire nipples rub the sway bar, but that's it. I might rub some paint off the sway bar this weekend when I take it out.
'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike
|
|
|
Re: New Rollers
[Re: NathanC]
#809569
05/03/07 09:25 PM
|
Joined: Jan 2001
Posts: 3,876
Roll Me Over
|
The tire nipples rub the sway bar, but that's it. Nothing wrong with rubbing nipples. <img src="/forums/images/graemlins/lol.gif" alt="" />
89 2dr 3.0 AT, manual hubs. 33x12.5 MT gen 2 coils,Cranked front tbars Dons rocker protection, Front/Rear Bumpers. ARB rear locker, 2" BL, Beefed up skid plates/trailing arms. Gen II uca, 2 Bouncy seats www.youtube.com/TagGeorge
|
|
|
Re: New Rollers
[Re: Tag]
#809570
05/03/07 10:09 PM
|
Joined: Feb 2000
Posts: 3,269
Roll Me Over
|
Nice..how much body lift are you running?
99 Gen 2.5, fixing blown head gasket
89 SWB- 33's, ARB Front locker, SR rear locker/axle, SR F brakes, winch, WST Offroad Armor all Around, 2.85 Aussie T-case Gears (SOLD)
Sold: (2) 95 SR's, 86 SWB, 90LWB, 91 LWB
-Can Change a timing belt in my sleep..
|
|
|
Re: New Rollers
[Re: justice]
#809571
05/03/07 10:32 PM
|
Joined: Apr 2002
Posts: 3,622
OP
Roll Me Over
|
|
'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike
|
|
|
Re: New Rollers
[Re: NathanC]
#809572
05/03/07 11:18 PM
|
Joined: Apr 2006
Posts: 3,607
Roll Me Over
|
Oh man my 32's look so tiny!! Looks very cool Nathan <img src="/forums/images/graemlins/kewl.gif" alt="" />
'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...
|
|
|
Re: New Rollers
[Re: NathanC]
#809573
05/03/07 11:44 PM
|
Joined: Sep 2006
Posts: 53
Getting the Wheeling Fever
|
Wow that looks nice. Same colors as my tuck except I'm running 33's looks rood <img src="/forums/images/graemlins/kewl.gif" alt="" />
are you running lower diff gears?
Nice work
1994 Montero SR 101,000 JDM 3.5
2" BL, 2.5" Valley Springs Rear Coils
BFG's 33x12.5 MT
|
|
|
Re: New Rollers
[Re: silver94sr]
#809574
05/04/07 12:00 AM
|
Joined: Apr 2002
Posts: 3,622
OP
Roll Me Over
|
are you running lower diff gears? Stock 4.636's. I'll see how it does this weekend.
'06 Dakota QC 4.7 6sp 4x4
'88 Mighty Max
'77 KZ1000 fun old bike
|
|
|
Re: New Rollers
[Re: NathanC]
#809575
05/04/07 01:48 AM
|
Joined: Feb 2001
Posts: 9,781
Mitsubishi Forum Moderator
|
It looks really nice, congrats!! I am interested to hear what you get for gas mileage to the trail. I need new 33's up front and have considered just biting the bullet and going to 35's. On the other hand, my gas mileage is already atrocious with the 33's. <img src="/forums/images/graemlins/barf.gif" alt="" />
DougH
1997 SR - Current Lawn Ornament
1995 SR - RIP
1993 RS - RIP
|
|
 Re: New Rollers
[Re: DougH]
#809576
05/04/07 02:06 AM
|
Joined: Dec 2000
Posts: 6,896
Trail Leader
|
DougH?, I remember you from way back when you used to post here. <img src="/forums/images/graemlins/ignore.gif" alt="" /> <img src="/forums/images/graemlins/smile.gif" alt="" /> Gen2s look bad <img src="/forums/images/graemlins/butwiggle.gif" alt="" /> on 35s.
I just want to tell you both good luck, and we're all counting on you.
|
|
|
Re: New Rollers
[Re: sparkem]
#809577
05/04/07 04:14 AM
|
Joined: Feb 2001
Posts: 9,781
Mitsubishi Forum Moderator
|
Sure, just keep reminding what a bad moderator I have been. As if the guilt wasn't enough <img src="/forums/images/graemlins/baby.gif" alt="" /> <img src="/forums/images/graemlins/smile.gif" alt="" />
DougH
1997 SR - Current Lawn Ornament
1995 SR - RIP
1993 RS - RIP
|
|
|
|
