Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Hood Release #820197 06/20/07 05:30 AM
Joined: Feb 2006
Posts: 3
J
Jimmythec Offline OP
Need a Spot
Does anybody know how to open the hood of 97 T100 with a broken hood release? I went to open the hood today and the cable is slack and apparently broken. I can't see anything through the grill that will release the latch. Anyone else ever ran into this? Thanks, Jim

Re: Hood Release [Re: Jimmythec] #820198 06/20/07 11:29 AM
Joined: Jul 2003
Posts: 1,262
foxtrapper Offline
Body Damage is Cool
Going from memory of my latch

It's dead center, at the front of the hood. The cable comes in from the driver side.

You'd reach in behind the grill, and pull/pry the lever to the drivers side until the hood pops. Then release the secondary latch in the normal manner.


'97 T-100 SR5
'86 Toyota's, the variety pack (all gone)

Moderated by  4x4Wire, Dandeman, ErikB, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.012s Queries: 15 (0.010s) Memory: 0.5870 MB (Peak: 0.6346 MB) Data Comp: Off Server Time: 2026-07-17 03:57:00 UTC
Valid HTML 5 and Valid CSS