Belt tension Pulley

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Belt tension Pulley #828528 08/03/07 09:57 PM

Joined: Sep 2004

Posts: 45

Bakersfied, California

ONEOFAKIND Offline

Getting the Wheeling Fever

Hi all,

I have what seems to be on going issues with the tension pulley. I have replaced it twice and last time just replaced the bearing. Have others had this issue and what is the more permanent fix? Also while I'm here I wanted to thank those of you reading this that responded to my AC question, everything was fine turns out the valve needle some how came loose slightly and this was how I was losing freon.

90 Trooper LS
5 Spd
V6 2.8L

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 0.006s Queries: 14 (0.004s) Memory: 0.5832 MB (Peak: 0.6233 MB) Data Comp: Off Server Time: 2026-06-09 21:49:12 UTC
Valid HTML 5 and Valid CSS