Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
S.A..S. info needed #829349 08/08/07 01:32 AM
Joined: Jan 2007
Posts: 46
S
scotia Offline OP
Getting the Wheeling Fever
In order to do a SAS on my truck, I will need a solid front axle. Can one be used from a land cruiser? I know about the 4runners and solid axle truck swaps but will it work with the front cruiser axle? Are they not the same axles?

Re: S.A..S. info needed [Re: scotia] #829350 08/08/07 02:59 AM
Joined: Jan 2001
Posts: 11,595
Adam F Offline
Forum Moderator
What year axle are you talking about? No, they are not the same axles. Similar, but not the same. Widths vary, from 57" to 63", diffs are different too. Older FJ40's have drums in the front, and smaller diameter birfield joints.


88 4R, 350 V8, R150 5 speed Sold <...uot; />
97 4R, stock, daily driver
98 Sienna, kid and dog hauler, wife's ride

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5860 MB (Peak: 0.6338 MB) Data Comp: Off Server Time: 2026-06-17 10:44:55 UTC
Valid HTML 5 and Valid CSS