96 trooper flexplate failure, I think

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Page 2 of 2

Re: 96 trooper flexplate failure, I think [Re: jim_carlson] #833542 09/18/07 04:57 AM

Joined: Sep 2007

Posts: 13

jim_carlson Offline

Need a Spot

Well I got my son's Trooper back. the bill was $1600.00 and I split it with the Dealer 50/50 but I replaced the flex plate the dowel pins (they were missing) the bolts. the Torque converter, the tip had wear on it. The pilot bushing the exhaust gaskets, Transmission flush. Anyway its up and running. Now to figure out the intermittent chck engine light. Oh and thanks Jerry for sending me the flex plate and dowels and bolts.

Jim

Page 2 of 2

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 0.006s Queries: 16 (0.004s) Memory: 0.5912 MB (Peak: 0.6467 MB) Data Comp: Off Server Time: 2026-05-29 16:09:59 UTC
Valid HTML 5 and Valid CSS