Is there anyone in the North Puget Sound area that would have some time this Saturday to give me a hand. I am trying to pull the tranny on my Trooper and have run into a stumbling block that is kicking my butt. I am everything loose except two bolts on the bell housing. Whoever put it on should never be allowed to use a pneumatics again.

I canÆt get it loose even with my IR ¢ö impact driver and I run out of hands to use a cheater pipe on a breaker bar.

If you know where Walker Valley is, I am about 1 ¢ miles from where you turn off Highway 9 to go to Walker Valley.

I work this weekend, actually until the 29th if you still need help PM me. I can borrow any tool from work that you can think of...
<img src="/forums/images/graemlins/patriot.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/patriot.gif" alt="" />

Success!! Kary Schneider came up and helped me get it out. It took his 36" extension and a 24" breaker bar, but it came out.