Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Turbo calipers #843326 10/24/07 12:41 AM
Joined: Dec 2006
Posts: 233
Vanishing_Point Offline OP
Wheeler
Can anyone tell me if the v6 and turbo calipers are the same?

Re: Turbo calipers [Re: Vanishing_Point] #843327 10/24/07 02:18 AM
Joined: Aug 2003
Posts: 2,854
G
Greg_Canada Offline
Roll Me Over
I dont know for sure, but i'm guessing they would, as teh v6 and turbo rear diffs were the same. It would only make sense, i've never seen a seperate part # for different calipers (and knowing toyota, they like to keep things similar between everything)


89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
Re: Turbo calipers [Re: Greg_Canada] #843328 10/24/07 02:41 AM
Joined: Dec 2006
Posts: 233
Vanishing_Point Offline OP
Wheeler
That was my reasoning too.


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5908 MB (Peak: 0.6443 MB) Data Comp: Off Server Time: 2026-06-13 10:49:26 UTC
Valid HTML 5 and Valid CSS