Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
3.4 L Head Gasket Replacement #845918 11/08/07 12:40 AM
Joined: Jan 2003
Posts: 205
B
brentox Offline OP
Wheeler
A buddy of mine is in the middle of a head gasket replacement on his 96' 3.4L. I have searched the forum for information, but no dice. Anyone have any links or hints particulary for reassemble and timing of the cams.

thanks...


92 Extended Cab 4x4, 3.0 5-Speed Scratched, Dented and Rusted.
Re: 3.4 L Head Gasket Replacement [Re: brentox] #845919 11/08/07 03:34 AM
Joined: Aug 2003
Posts: 712
john_luttrell Offline
Rock Warrior
Look in the sticky post at the top of this forum for a list of online maintenance manuals. The late model manual for any of the 3.4 trucks will work for the reassembly of the engine; all the 3.4 engines are the same. In fact, try this one.........

http://www.deserted1.com/FSM/


John Luttrell
2001 4x4 short cab, 3 inch lift with 33 inch mudders and Powertrax no-slip in the rear


1991 Jeep YJ, 4 inch suspension lift on 33" BFG's
Re: 3.4 L Head Gasket Replacement [Re: john_luttrell] #845920 11/08/07 11:50 PM
Joined: Jan 2003
Posts: 205
B
brentox Offline OP
Wheeler
Thanks a bunch <img src="/forums/images/graemlins/cheers.gif" alt="" />..sorry i didnt catch the stickys up top....I usually hang out on the old toyota forum. This link was perfect


92 Extended Cab 4x4, 3.0 5-Speed Scratched, Dented and Rusted.

Moderated by  4x4Wire, Dandeman, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.010s Queries: 15 (0.008s) Memory: 0.5944 MB (Peak: 0.6475 MB) Data Comp: Off Server Time: 2026-07-16 08:54:06 UTC
Valid HTML 5 and Valid CSS