93' Pick-up lift kit

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

93' Pick-up lift kit #852489 12/12/07 08:52 PM

Joined: Nov 2004

Posts: 7

Woodbridge, VA

My_Little_Red_Truck Offline

Need a Spot

Hey guys, a friend on mine has a 93' Toy pick-up V6 standard cab and is looking for a entry level 2.5 - 4" lift kit for his truck. He wants to put on size 32's and not rub the wheels wells. We are having a hard time finding something that isn't way out of his price range for the truck. He doesn't do any mudding just a little light trails that's it. Any help would be greatly appreciated.

Thanks
Mike

Re: 93' Pick-up lift kit [Re: My_Little_Red_Truck] #852490 12/12/07 09:26 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Should not need any lift to fit 32s, but some mild lift options are listed on the web page below:
- http://www.4crawler.com/4x4/ForSale/BodyLiftKit.shtml#FAQ10

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Re: 93' Pick-up lift kit [Re: 4Crawler] #852491 12/12/07 10:27 PM

Joined: Nov 2004

Posts: 7

Woodbridge, VA

My_Little_Red_Truck Offline

Need a Spot

I will send him this link!

Thanks

Re: 93' Pick-up lift kit [Re: My_Little_Red_Truck] #852492 12/13/07 09:46 AM

Joined: Apr 2002

Posts: 3,568

Grass Valley, CA

Snowtoy

Roll Me Over

I ran 32x11.50 AT's on 15x8's w/3.75BS on my '90 for a few years and they only rubbed a little at full lock at the inner body seam. All you have to do to resolve this issue is beat the seam down w/a good sized hammer. It will be easier if you take the tire off, so you can get a good swing. You can also grind the seam down, but the hammer route is the easiest. With a narrower rim/or narower tirethe 32's may not rub at all.

More than tread lightly. Leave it like you were never there, nor anyone else.
'90 X-cab 4.88's 33 BFG AT's, rr ARB, Headers, Ignition upgrade, cold air induction.
'91 X-cab 5.29's 315's BFG MT's, rr ARB, custom bumper and flatbed

Re: 93' Pick-up lift kit [Re: My_Little_Red_Truck] #852493 12/13/07 03:48 PM

Joined: Dec 2007

Posts: 33

ne pa

mgd4me

Getting the Wheeling Fever

i have a 94 ex cab w/ 3" body.. i was running 33" w/o any rubing. i down sized for winter.. the thing i'm looking @ is 1.5 bj spacer from 4x4 crawler..it all depends on how the truck will be used..

94 ex cab 3" body...33" bfgs... 1 roll over..stocker
http://www.youtube.com/watch?v=tYlDedAt96Y

Re: 93' Pick-up lift kit [Re: mgd4me] #852494 12/16/07 06:47 AM

Joined: Sep 2006

Posts: 81

ovrrdrive

Getting the Wheeling Fever

It all depends on the tires and the backspace of the rims they're on really...

I ran 32x11.50's on my truck and they rubbed like hell until I put on a 3" body lift. With the bl I could have run 33's pretty easily.

If they were available at the time though a bj spacer most likely would have been all I really needed. I just would have also had to do a shackle in the rear to level the truck.

Re: 93' Pick-up lift kit [Re: 4Crawler] #852495 12/16/07 04:59 PM

Joined: Feb 2001

Posts: 3,935

Minnesota

bkg

Roll Me Over

Quote

Should not need any lift to fit 32s, but some mild lift options are listed on the web page below:
- http://www.4crawler.com/4x4/ForSale/BodyLiftKit.shtml#FAQ10

This is the way to go. Ran 32x11.5's on a 90 pickup and 94 4Runner, both on factory 15x7 SR5 wheels with zero rub.

Brian K. Gallus
I have nothing important to say.

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: