Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
2.3 / 2.6 Flywheel bolt torque value? #855871 12/29/07 01:52 PM
Joined: Dec 2000
Posts: 53
aribert Offline OP
Getting the Wheeling Fever
My Haynes manual list a flywheel bolt torque value of 40 ft-lbs for the 4 cyl engine. I am questioning the value - it seems low. I was expecting something in the 50 to 70 ft-lb range. If you have access to another source for torque values please check and post. Thanks

Re: 2.3 / 2.6 Flywheel bolt torque value? [Re: aribert] #855872 12/30/07 02:58 AM
Joined: Jan 2000
Posts: 2,437
lttlbddy Offline
Body Damage is Cool
39.8 plus or minus 3.6

That's from the Isuzu manual. Weird numbers because it is converted from kg.

That's for new bolts.








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.008s Queries: 15 (0.006s) Memory: 0.5876 MB (Peak: 0.6357 MB) Data Comp: Off Server Time: 2026-06-17 11:25:04 UTC
Valid HTML 5 and Valid CSS