|
|
|
|
 Aisin Manual hubs conversion
#856885
01/02/08 09:11 PM
|
Joined: Apr 2005
Posts: 155
OP
Wheeler
|
Okay I am going to do my cv boots soon as I have a boot that is going. So I would like to change over as I am going to have to have the front end apart anyways. I know that I need the hubs off a 86-95 4r or pickup. Beyond that I'm in the dark I figure that I will need seals but I'm not sure what ones. I've got the Tacoma service manual for installation and if I need to I can download the T100 manual from the toyota service site. So if someone could point me in the right direction I would appreciate it.
1997 T-100 100k and counting Green
5spd 4x4 Ext Cab isr mod Aisin Manual hubs
|
|
|
Re: Aisin Manual hubs conversion
[Re: Flannelman]
#856886
01/02/08 11:20 PM
|
Joined: Jan 2001
Posts: 11,595
Forum Moderator
|
Seal that goes in between locking hub and wheel hub 43422-60010
Seal that goes in between locking hub and dial 43422-60011
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5888 MB (Peak: 0.6370 MB) Data Comp: Off Server Time: 2026-06-07 08:38:07 UTCValid HTML 5 and Valid CSS 
