|
|
|
|
 99 Taco Head Gasket repair
#857903
01/06/08 02:42 AM
|
Joined: Jan 2008
Posts: 3
OP
Need a Spot
|
Am looking for anything on 99 Tacoma head gasket repair I have the dealer repair manual. Seems simple enough but I'd like to hear from some one whos been there already..k <img src="/forums/images/graemlins/zombie.gif" alt="" />
145.000 miles still new
|
|
 Re: 99 Taco Head Gasket repair
[Re: ragtoy99]
#857904
01/06/08 07:02 PM
|
Joined: Aug 2003
Posts: 712
Rock Warrior
|
I have done lots of them; not too bad of a job, if you have the tools and experiance. You can knock the job out in around 6 hours or so if you have everything prepped and all the parts ready to go.
Take your time and be sure to use a torque wrench and the proper torque sequence. Also triple check the timing marks when you line it all back up.
John Luttrell
2001 4x4 short cab, 3 inch lift with 33 inch mudders and Powertrax no-slip in the rear
1991 Jeep YJ, 4 inch suspension lift on 33" BFG's
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.005s) Memory: 0.5892 MB (Peak: 0.6368 MB) Data Comp: Off Server Time: 2026-05-29 14:37:45 UTCValid HTML 5 and Valid CSS 
