Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
22RET valve adjustment #859532 01/13/08 12:47 AM
Joined: Oct 2007
Posts: 31
R
rondog Offline OP
Getting the Wheeling Fever
My boyfriend is driving his turbo 4runner back from California and needs to adjust the valves. He needs to know hot or cold and tolerences for intake and exhaust. He's on the road right now so any info would be greatly appreciated, thank you!!!

Re: 22RET valve adjustment [Re: rondog] #859533 01/13/08 01:10 AM
Joined: Mar 2006
Posts: 13
N
netgodsrdn2 Offline
Need a Spot
Valve Clearance (cold):
Intake: 0.20 mm (0.008 in.)
Exhaust: 0.30 mm (0.012 in.)

Re: 22RET valve adjustment [Re: netgodsrdn2] #859534 01/13/08 01:39 AM
Joined: Oct 2007
Posts: 31
R
rondog Offline OP
Getting the Wheeling Fever
Awesome. Thanks a lot!


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5914 MB (Peak: 0.6440 MB) Data Comp: Off Server Time: 2026-05-29 23:49:48 UTC
Valid HTML 5 and Valid CSS