|
|
|
|
 hubs
#863662
01/24/08 06:50 PM
|
Joined: Nov 2003
Posts: 78
OP
Getting the Wheeling Fever
|
i have the aisn hubs on my amigo. when its jacked up, when i spin the wheel should the half shaft axle turn with the tire when the hubs are unlocked?
|
|
|
Re: hubs
[Re: lowflying90]
#863663
01/24/08 06:57 PM
|
Joined: Apr 2003
Posts: 1,994
Body Damage is Cool
|
No.
You should be able to turn the cv shaft with the tires on the ground w/hubs unlocked.
|
|
|
Re: hubs
[Re: Bansil]
#863664
01/30/08 04:13 PM
|
Joined: Nov 2003
Posts: 78
OP
Getting the Wheeling Fever
|
i can turn the passenger side axle by hand but the drivers side won't turn. could it be a wheel bearing?
|
|
|
Re: hubs
[Re: lowflying90]
#863665
01/30/08 06:51 PM
|
Joined: Apr 2003
Posts: 1,994
Body Damage is Cool
|
I doubt it.
The axle goes thru the spindle and doesn't even touch the wheel bearings.
The hub sounds like it is locked it.
Take the hub off, take loose small bolts,pull cover,remove snap ring on axle shaft and then remove the 6 large allen head bolts that hold the hub body on.
You should be able to turn cv easily
If not then it sounds like the roller bearing that supports the outer axle(stub axle) as it goes thru the spindle is rusted or seized up.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5990 MB (Peak: 0.6541 MB) Data Comp: Off Server Time: 2026-06-20 23:13:13 UTCValid HTML 5 and Valid CSS 
