Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
rear brake conversion #864043 01/26/08 08:30 PM
Joined: May 2006
Posts: 46
jbogan67 Offline OP
Getting the Wheeling Fever
wondering if you could help me out i am converting my samurais rear brakes to disc i was wondering how to run a proportioning valve and how much to set it at and whatnot. ive prettymuch got everything else figured out and how i wanna do it. thanks


Chicks Dig Body Damage
Re: rear brake conversion [Re: jbogan67] #864044 01/27/08 01:32 AM
Joined: Nov 2004
Posts: 247
Billjohn Offline
Wheeler
Here is an article on the full installation, and it includes discussion on how to set up the proportioning valve.
http://www.izook.com/tech/samurai/drivetrain/discbrakes/discbrakeinstall.htm


Bill
----------------------------
God Forgives, Rocks Don't...

Moderated by  4x4Wire, code33 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5865 MB (Peak: 0.6343 MB) Data Comp: Off Server Time: 2026-06-07 10:31:34 UTC
Valid HTML 5 and Valid CSS