Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
control arms #873557 03/06/08 02:33 AM
Joined: Mar 2008
Posts: 10
S
shtkicker Offline OP
Need a Spot
well i was wondering. i have a 05 tj and i will soon be putting a lift on, would i need to buy control arms or can i use the stock control arms with just lift springs.

Re: control arms [Re: shtkicker] #873558 03/06/08 06:54 AM
Joined: Aug 2007
Posts: 147
the_other_guy Offline
Wheeler
You will want to get new arms for any lift above 3 inches. maybe even lower than that, to keep the proper caster.


Your road to glory will be rocky, but fulfilling.
- Panda Express fortune cookie

94 YJ. no lift...YET
Re: control arms [Re: shtkicker] #873559 03/15/08 05:01 AM
Joined: Mar 2008
Posts: 1
K
kurtdaniel Offline
Need a Spot
You will also need longer control arms for the jeep wheels to center your axle from back to front


Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.004s) Memory: 0.5910 MB (Peak: 0.6437 MB) Data Comp: Off Server Time: 2026-05-29 22:43:03 UTC
Valid HTML 5 and Valid CSS