NEED SEATS FOR 86 TOYOTA 4x4

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

NEED SEATS FOR 86 TOYOTA 4x4 #877354 03/26/08 02:52 AM

Joined: Mar 2008

Posts: 2

texas

tomahawk

Need a Spot

what brand of seat can i buy for my toyota and still retain the seat adjustment and recline features. looked at some recaro, but wanted some advice if there is something better. also is there a direct bolt in you can get or do i need to reuse the factory seat riser. i have bucket seat from factory now. my toyota has the SR5 package.

Re: NEED SEATS FOR 86 TOYOTA 4x4 [Re: tomahawk] #877355 03/26/08 04:34 AM

Joined: Apr 2002

Posts: 3,568

Grass Valley, CA

Snowtoy

Roll Me Over

Any after market seat is going to require the after market brackets, or if you are handy w/welder and fabricating modifing the stock brackets to fit the new seats.

If you are only looking to upgrade your worn seats and not spending $3-600, look at replacing them with some Celica, MR2, Supra(require more nods than Celica/MR2), or 2nd/3rd gen truck and 4-Runner seats. Everything but the Supra seats should be just about a direct bolt in, and shouldn't run you more than $100/pair.

More than tread lightly. Leave it like you were never there, nor anyone else.
'90 X-cab 4.88's 33 BFG AT's, rr ARB, Headers, Ignition upgrade, cold air induction.
'91 X-cab 5.29's 315's BFG MT's, rr ARB, custom bumper and flatbed

Re: NEED SEATS FOR 86 TOYOTA 4x4 [Re: Snowtoy] #877356 03/26/08 05:16 AM

Joined: Feb 2007

Posts: 19

Lonesome Dove, Texas

my88toy4

Need a Spot

will the 2nd/ 3rd gen 4 runner seats work ( without too much modification) in a 1st gen 4runner ???

Re: NEED SEATS FOR 86 TOYOTA 4x4 [Re: my88toy4] #877357 03/26/08 04:17 PM

Joined: Nov 2006

Posts: 87

Northwest Territories , Canada

PETE_YK

Getting the Wheeling Fever

Yup. I put seats out of a 93 4runner into my 88 truck, 3 of 4 holes lined up, drilled a hole in the floor for the 4th hole. turned out good.

88' Xtra cab, 22RE, 5 spd, alumi flat deck, 3" BL, 35" muds...awaiting SAS.

'02 Ram, 4.7, REV 'Shooter' wheels wrapped with M.T. Baja claws.

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: