|
|
|
|
1987 Raider Coil Question
#880959
04/14/08 11:04 PM
|
Joined: Apr 2007
Posts: 8
OP
Need a Spot
|
Could someone please post a diagram or picture for the proper wiring of a coil for a 2.6 Raider? Thanks in advance. This will be a huge help.
Tommy
|
|
Re: 1987 Raider Coil Question
[Re: Raider]
#880960
04/14/08 11:45 PM
|
Joined: Jan 2001
Posts: 13,649
Web Wheeler
|
Note white ceramic resistor on side of coil.
To coil (-) terminal: Blue wire from dist. White/blue/black stripe to tach. one other wire of unknown color goes to ecu (should go to same wire wrap as wires to carb).
To one end of resistor:
fat Black/red stripe wire from ignition start position Short unknown color jumper wire to coil (+)
To other end of ceramic resistor:
Fat black/white stripe wire from ignition switch run position smaller black white wire to distributor igniter (in same wire wrap as the blue wire to coil (-)
Not responsible for advice not taken...
|
|
Re: 1987 Raider Coil Question
[Re: fasteddy]
#880961
04/15/08 12:35 AM
|
Joined: Apr 2007
Posts: 8
OP
Need a Spot
|
Thanks FastEddy!!! Much appreciated!
|
|
Re: 1987 Raider Coil Question
[Re: Raider]
#880962
04/15/08 02:45 AM
|
Joined: Apr 2007
Posts: 8
OP
Need a Spot
|
Fasteddy--thanks again. I have one more blue wire going to a resistor on the wheel well. I believe it goes to the positive on the coil but wanted to make sure. Thanks.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.003s) Memory: 0.5994 MB (Peak: 0.6546 MB) Data Comp: Off Server Time: 2026-06-20 19:08:20 UTCValid HTML 5 and Valid CSS