Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
4d55 valvetrain in a 4d56 head #882352 04/23/08 02:35 AM
Joined: Apr 2008
Posts: 10
V
Vulcen Offline OP
Need a Spot
Is it possible to use a cam, rockers and valves from a 4d55 to a 4d56 head?

Re: 4d55 valvetrain in a 4d56 head [Re: Vulcen] #882353 04/25/08 01:44 AM
Joined: May 2007
Posts: 93
M
Mikewarme Offline
Getting the Wheeling Fever
Yes, if it an early 4d56. 91 and back I Believe. I did it

Re: 4d55 valvetrain in a 4d56 head [Re: Mikewarme] #882354 04/25/08 11:40 PM
Joined: Apr 2008
Posts: 10
V
Vulcen Offline OP
Need a Spot
Thanks for the info.








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5916 MB (Peak: 0.6444 MB) Data Comp: Off Server Time: 2026-05-29 22:42:39 UTC
Valid HTML 5 and Valid CSS