Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
marker light to blinker #884338 05/05/08 10:30 PM
Joined: Sep 2003
Posts: 97
Yaker Offline OP
Getting the Wheeling Fever
I remember seeing a write up on turning your first gen marker light in to blinker marker combo. I just want to make it a blinker only but that is not as simple as just hooking up the wire from the blinker and not the marker because I tried that.

I was wondering what else it would take, or if someone would point me to that write up.


Work smart not hard!

83 SR5 Pickup, 4" home brew lift, 36 inch TSLs ,locked front and rear, 4.7 t-case gears, 5.71 diff. gears, cross over high steer, 8k warn, custom bumper and flat bed, and huge plans.
Re: marker light to blinker [Re: Yaker] #884339 05/05/08 10:46 PM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
How I did mine putting in an 1157 socket and bulb into the lamp:
[Linked Image]

plus links to some other options:
- http://www.4crawler.com/4x4/CheapTricks/TurnSignal.shtml


Last edited by 4Crawler; 05/06/08 02:18 AM.

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5893 MB (Peak: 0.6373 MB) Data Comp: Off Server Time: 2026-05-29 22:43:39 UTC
Valid HTML 5 and Valid CSS