Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
injectors not firing #889666 06/09/08 02:16 AM
Joined: Mar 2008
Posts: 11
JD9996 Offline OP
Need a Spot
I have a 1990 3.0 v6, I took a test light and checked power at harness and had power on both legs and tried to crank engine and still had power on both legs with no ground pulsing. What is the next thing to check? Thanks!!

Re: injectors not firing [Re: JD9996] #889667 06/09/08 03:51 AM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
Likely the 3.0 is the same as the 2.4 engine, the grounds run back to the ECU. Usually the ground wires from the injectors tie together and run back to 2 grounded pins on the ECU (No10 and No20 in the 2.4 ECU). Search the forum for "Injector Wire Splice" and and see if that issues applies to your case.


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5903 MB (Peak: 0.6381 MB) Data Comp: Off Server Time: 2026-06-07 04:46:58 UTC
Valid HTML 5 and Valid CSS