|
|
|
|
 Re: POR-15 and NEW bed ......
[Re: philly]
#904114
09/10/08 01:35 AM
|
Joined: Sep 2003
Posts: 1,856
OP
Body Damage is Cool
|
my "shutz gun" .. 2 wands .. first is a rotating 360* "V" notch . Second is a 90* rotating . ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/MY%20Trekker/HPIM0818.jpg) although the frame looks rough .. it is all surface , there are NO PIN HOLES .. NONE .. frame is good and strong .. The pictures really dont do any justice to the work , looks much better in person ... and about a leter of POR-15 was used ..
|
|
|
Re: POR-15 and NEW bed ......
[Re: CJM]
#904115
09/10/08 03:18 PM
|
Joined: Aug 2001
Posts: 5,986
Toyota Section Staffer
|
In my experience, POR15 without metal prep (and sometimes even WITH metal prep, if not done precisely) including their three step process doesn't adhere very well. Peels off in fact. One of the downers of POR15. How did you get all that done on the inside?
-Bill
'87 4Runner w/ '96 5VZ-FE, 'Red Chili II'
'97 Taco XtraCab 3RZ-FE, 'BlackBean'
TLCA # 13257, Rising Sun 4x4 Club Land Use Coordinator
"He who stops being better stops being good." -Oliver Cromwell
|
|
|
Re: POR-15 and NEW bed ......
[Re: Red_Chili]
#904116
09/10/08 03:48 PM
|
Joined: Sep 2003
Posts: 1,856
OP
Body Damage is Cool
|
absolutly I have had the same issues .. and obviously not possable to "scrub" the inside of the frame , but I have had some great results also , just applying to a cleaned , rusted piece .. with no pealing ..There is no "sure fire way"
I guess only time will tell for sure .
|
|
|
Re: POR-15 and NEW bed ......
[Re: CJM]
#904117
09/11/08 02:10 AM
|
Joined: Sep 2003
Posts: 1,856
OP
Body Damage is Cool
|
so got the new pump holder today , and got it all swapped ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/chads%20truck/HPIM0935.jpg) ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/chads%20truck/HPIM0936.jpg) and tank back in place .. ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/chads%20truck/HPIM0937.jpg) rolled up the spare tire , and dropped the new fiberglass box on .. ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/chads%20truck/HPIM0938.jpg) ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/chads%20truck/HPIM0939.jpg) .
|
|
|
Re: POR-15 and NEW bed ......
[Re: CJM]
#904118
09/15/08 04:09 PM
|
Joined: Jan 2000
Posts: 454
Mudrunner
|
I replaced the FP bracket, later replaced the pump to find total rust on the bracket. I would suggest you POR the new parts. The original in your pic has the gold colored coating, the replacement does not..... ![[Linked Image]](http://www.flexplorers.com/photopost/data/500/9159_Sndr___Pickup_rusted.jpg)
|
|
|
Re: POR-15 and NEW bed ......
[Re: Toy4x]
#904119
09/16/08 02:11 AM
|
Joined: Sep 2003
Posts: 1,856
OP
Body Damage is Cool
|
|
|
|
|
|
|
|
