|
|
|
|
 Front Axle Truss
#912543
10/24/08 07:55 PM
|
Joined: Aug 2004
Posts: 271
OP
Mudrunner
|
I made a Front Axle Truss and had some questions about welding it on. Should I remove the axles and drain it before welding the truss on? Or could it just be welded on just taking care to do small welds and letting it cool inbetween? I was thinking the latter since it is subjected to heat during normal operation anyways.
Thanks
84 Ext. Cab Pickup.
|
|
 Re: Front Axle Truss
[Re: Buck]
#912544
10/27/08 04:41 AM
|
Joined: Aug 2004
Posts: 271
OP
Mudrunner
|
Well, since nobody replied here, the answer is to just weld it on without draining or removing anything, doing 1" stitches at various locations until it's all complete. At least that's the answer I got over on Yotatech. Did it on Saturday without any problems, and went wheelin at my clubs annual Goblin run Saturday night. <img src="/forums/images/graemlins/kewl.gif" alt="" />
84 Ext. Cab Pickup.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5884 MB (Peak: 0.6362 MB) Data Comp: Off Server Time: 2026-06-07 07:19:39 UTCValid HTML 5 and Valid CSS 
