Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
SM 465 with a I6 #916299 11/17/08 07:15 PM
Joined: Aug 2007
Posts: 10
S
SkibumMt20 Offline OP
Need a Spot
does anyone know mate a inline six with a sm 465


89 YJ DD

87 YJ 350 TBI, SM465, NP241(eh), SOA w/1.5" springs, 35" MTR, D44 (aussi locker)/14bolt (welded) with 4.88's

Location: Upper Michigan
Re: SM 465 with a I6 [Re: SkibumMt20] #916300 11/24/08 02:54 AM
Joined: Dec 2007
Posts: 725
TayJ Offline
Rock Warrior
Don't mate the I6 with the S4M56. If you are going to do a swap like that use an NV4500 out of a chevy, you get a deep first gear plus an over drive gear. And the SM456 is getting rare and expensive.

But if you really want to call Advanced Adapters, they have the parts to do it. They don't list it on the web site so you have to actually call. Cost alot too.


Jeep
Jus' sayin'

Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5857 MB (Peak: 0.6332 MB) Data Comp: Off Server Time: 2026-06-07 05:34:34 UTC
Valid HTML 5 and Valid CSS