There's a Gen 2 rear locker at Shorti and Daves U-Pull it Truck yard in Conshohoken PA (just outside Philadelphia). The brake calipers are missing but the rear itself is untouched (if anyone was interested).

I was just there today and was able to get a good working TPS sensor and a Mass Air Flow sensor too (double score). My buddy needed a new caravan radio and a side window, $30 bucks for everything!

Will this work in a MM v6 housing?

Thanks

nope, the Gen2 SR is all together bigger.

Did you grab a quote from the guy for the whole axle assembly? My Raider wants one because the Montero has been teasing her. <img src="/forums/images/graemlins/lol.gif" alt="" />

Pictures! Some rears should never be left untouched.

Just to clarify. I don't know if it's an SR or not. It's a Gen2 body with a coil spring rear (I thought the SR was a leaf spring, but I'm not 100% sure of that). It has a R/D switch on the console with an Orange sticker stating it locks the rear diff. I'm not heading back up there anytime soon, so I don't know it's current status, though it appeared to be a fairly recent addition (Other then the drivers door, driver's fender hanging off, front end damage and upper intake off the 3.5L DOHC being missing, it was fairly intact). Trans and Transfer case were also still present. This is a pull it yourself yard, and the use a fork lift to lift vehicles (no jacking allowed, though it's back out of site of the office so...).

Wish I lived closer to it... <img src="/forums/images/graemlins/frown.gif" alt="" />