Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
need an option #927114 01/22/09 07:49 PM
Joined: Feb 2008
Posts: 17
F
fulltime79 Offline OP
Need a Spot
a buddy of mine owns an 89 comanchee p/u, is there any way to eliminate that d30 axel disconnect, possibly with another axel shaft from a non disconect axel ? keeps breaking the shift fork . any ideas would be appreciated !

Re: need an option [Re: fulltime79] #927115 01/22/09 08:56 PM
Joined: Feb 2000
Posts: 6,247
4x4Wire Offline
Trail Leader
***
http://www.4x4posi-lok.com/

Their system replaces the central axle disconnect with a cable actuated engagement.

Also, they offer an upgrade to the factory shift fork...


John Stewart
Editor - 4x4Wire.com
Editor - 4x4Voice
Editor - MUIRNet-News
President - BlueRibbon Coalition
Re: need an option [Re: 4x4Wire] #927116 01/25/09 12:23 AM
Joined: Feb 2008
Posts: 17
F
fulltime79 Offline OP
Need a Spot
thanks , i"ll check this out. <img src="/forums/images/graemlins/patriot.gif" alt="" />



thanks again, cast iron shift fork, exactly what the doctor called for <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" />and I <img src="/forums/images/graemlins/patriot.gif" alt="" />

Last edited by fulltime79; 01/25/09 01:21 AM.

Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5919 MB (Peak: 0.6449 MB) Data Comp: Off Server Time: 2026-06-07 09:10:04 UTC
Valid HTML 5 and Valid CSS