|
|
|
|
 3.0L problems
#930265
02/09/09 04:11 AM
|
Joined: Dec 2007
Posts: 4
OP
Need a Spot
|
i am wondering if anyone can help me. i just changed the motor in my truck,3.0L, and now it seems to be trying to flood from just off idle, up till it hits about 3000-3200rpm's. it did it before a little bit, but not bad enough to worry about. any info would be appreaciated. thanks.
|
|
|
Re: 3.0L problems
[Re: skippy446]
#930266
02/09/09 04:45 PM
|
Joined: Jan 2001
Posts: 11,595
Forum Moderator
|
What do you mean "trying to flood"?
|
|
|
Re: 3.0L problems
[Re: Adam F]
#930267
02/10/09 03:07 AM
|
Joined: Dec 2007
Posts: 4
OP
Need a Spot
|
it seems to be balling up with fuel. i know some of the problem is the TPS, a friend of mine told me to try un-pluggin it and see if it works any different, not much of a change. its harder on gas than it was with the old motor in it to. its out of a '91 4runner and i have it in a '90 pick-up
|
|
|
Re: 3.0L problems
[Re: skippy446]
#930268
02/10/09 10:16 PM
|
Joined: Dec 2007
Posts: 4
OP
Need a Spot
|
i have changed the wires, dist cap, button, plugs, MAF, coil, igniter. still no luck!
|
|
|
Re: 3.0L problems
[Re: skippy446]
#930269
02/11/09 04:24 AM
|
Joined: Apr 2007
Posts: 40
Getting the Wheeling Fever
|
is your idle screw set correctly?
"IM THERE BUDDY"
|
|
|
Re: 3.0L problems
[Re: wytee]
#930270
02/11/09 07:22 PM
|
Joined: Dec 2007
Posts: 4
OP
Need a Spot
|
the idle screw has not been touched. the only things i havent tried yet are another computer and another distrubitor. everything else i have changed
|
|
|
|
|
|
