Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
rodeo torque converter #930923 02/12/09 10:31 PM
Joined: Feb 2007
Posts: 35
J
jdawg13 Offline OP
Getting the Wheeling Fever
hey guys
i am swapping auto transmissions from a 97 rodeo to a 94 trooper.

i am having a real hard time getting the rodeo torque converter off.
the trans & starter are out, i just can't seem to get at these TC bolts to loosen them,
does anyone have any suggestions,
or will the trooper torque converter be the same as this rodeo?
any help would be appreciated, as i am frustrated!!
thanks alot
jay

Re: rodeo torque converter [Re: jdawg13] #930924 02/14/09 09:47 PM
Joined: Feb 2007
Posts: 35
J
jdawg13 Offline OP
Getting the Wheeling Fever
i guess i was over tired, so i went back yesterday and it came right off!! <img src="/forums/images/graemlins/rolleyes.gif" alt="" />








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5869 MB (Peak: 0.6349 MB) Data Comp: Off Server Time: 2026-06-17 13:25:18 UTC
Valid HTML 5 and Valid CSS