remote start installation ?-- 97 4runner

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

remote start installation ?-- 97 4runner #931467 02/16/09 06:28 PM

Joined: Aug 2005

Posts: 212

N. Cal -Chico

Boyota

Wheeler

I have this diagram to work with and the FSM from a 96 toyota from the taco section.

http://www.directeddealers.com/manuals/QG/Autostart/AS-1251v_AS-1252v_qg_us_h460s200v100_071108.pdf

Whats the best strategy for placement of a unit like this?
As far as being able to connect to all necessary harness points?

and these go where?
Purple/starter wire on left of diagram
green/5th relay wire

and most of the 12 pin connector

I'm givin up my toy and goin VWesty. Got my Westy and another Toy:)

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 0.005s Queries: 14 (0.003s) Memory: 0.5853 MB (Peak: 0.6252 MB) Data Comp: Off Server Time: 2026-05-29 21:09:43 UTC
Valid HTML 5 and Valid CSS