|
|
|
|
 Anyone know the specs of a 9" diff
#933055
02/24/09 08:32 PM
|
Joined: Feb 2004
Posts: 1,042
OP
Body Damage is Cool
|
I need to know the distance on the third member chunk between the plane which gets mounted to the face of the axle housing to the center of the carrier.
Anyone? Or any ideas of where to find this info? I have a 9" diff but i don't have the carrier. I estimate its a little over 1.5" but id like the exact number if anyone knows it.
Thanks.
Welding and Fabrication Engineer
2003 taco V6 ext cab sr5
1988 Toyota Pickup V6(totaled)
|
|
 Re: Anyone know the specs of a 9" diff
[Re: CraShYota]
#933056
02/24/09 09:45 PM
|
Joined: Dec 2000
Posts: 6,896
Trail Leader
|
|
I just want to tell you both good luck, and we're all counting on you.
|
|
|
Re: Anyone know the specs of a 9" diff
[Re: sparkem]
#933057
02/24/09 11:07 PM
|
Joined: Feb 2004
Posts: 1,042
OP
Body Damage is Cool
|
ford 9". sorry i didn't know there was another 9".
Welding and Fabrication Engineer
2003 taco V6 ext cab sr5
1988 Toyota Pickup V6(totaled)
|
|
|
Re: Anyone know the specs of a 9" diff
[Re: CraShYota]
#933058
02/25/09 12:52 AM
|
Joined: Dec 2000
Posts: 6,896
Trail Leader
|
That is what I figured, but if it was a Mitsu one I could get a measurement for you.
I just want to tell you both good luck, and we're all counting on you.
|
|
|
Re: Anyone know the specs of a 9" diff
[Re: sparkem]
#933059
02/25/09 01:39 AM
|
Joined: Feb 2004
Posts: 1,042
OP
Body Damage is Cool
|
I measured it as 1 23/32". but i measured assuming that where the chunk splits to hold the carrier is halfway and therefore the center. Hope its right. I'm designing/building a 9/60 moly housing. this may end up being the worst ***** show in the world. lmao. if there is a gap just fill it with weld right?
Welding and Fabrication Engineer
2003 taco V6 ext cab sr5
1988 Toyota Pickup V6(totaled)
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.6071 MB (Peak: 0.6710 MB) Data Comp: Off Server Time: 2026-05-25 13:00:54 UTCValid HTML 5 and Valid CSS 
