|
|
 air intake
#945913
05/19/09 06:25 AM
|
Joined: Sep 2007
Posts: 179
OP
Wheeler
|
Does anyone know the specs on an air intake? I want to build my own with a piece by piece kit but am not sure what size piping I need and all those other important details...
|
|
|
Re: air intake
[Re: toyT100]
#945914
05/19/09 06:03 PM
|
Joined: Aug 2003
Posts: 2,854
Roll Me Over
|
3.4? 2.75 i believe. Make sure you keep the pipe diameter the same as stock or it will mess up the MAF reading. (also make sure to keep the MAF the same distance from the engine)
89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
|
|
|
Re: air intake
[Re: toyT100]
#945915
05/19/09 07:23 PM
|
Joined: Apr 2006
Posts: 658
Rock Warrior
|
Keep your bends to a minimum number and angle. Every bend drops flow rate like crazy. If you have a buddy who is an engineer, look up flow rate calcs and check it out. Smoother on the inside the better...
trafdlo
|
|
|
Re: air intake
[Re: Greg_Canada]
#945916
05/20/09 12:15 AM
|
Joined: Sep 2007
Posts: 179
OP
Wheeler
|
yes it is a 3.4, sry. I was worried this would be harder than advertised and its already looking to be that way...
|
|
|
Re: air intake
[Re: toyT100]
#945917
05/20/09 12:54 AM
|
Joined: Apr 2004
Posts: 16
Need a Spot
|
i've got an adapter that you can use with the stock intake tubes that'll allow you to use a k&n cone filter with it. it'll sit right in front of the map sensor. let me know if interested.
|
|
|
Re: air intake
[Re: gentouteg]
#945918
05/20/09 03:22 PM
|
Joined: Aug 2003
Posts: 2,854
Roll Me Over
|
i've got an adapter that you can use with the stock intake tubes that'll allow you to use a k&n cone filter with it. it'll sit right in front of the map sensor. let me know if interested. It has a MAF not an AFM, do you have the right adaptor? Also, the stock airbox with a hole cut in the front makes more power than a cone filter. Airraid and Trueflow make intake tubes (dunno if they do for the t, check it out) and replacement filter, and they use the stock airbox.
89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
|
|
|
Re: air intake
[Re: Greg_Canada]
#945919
05/21/09 12:54 AM
|
Joined: Apr 2004
Posts: 16
Need a Spot
|
it is maf not map sensor. thanks for correcting that.
|
|
|
Re: air intake
[Re: Greg_Canada]
#945920
05/24/09 04:46 AM
|
Joined: Sep 2007
Posts: 179
OP
Wheeler
|
How bout this? I already have an K&N stock replacement filter, so will i get the same effect if I cut a hole in the upper side of the filter housing so the filter still does it's job? This would be instead of cutting a hole in the front of the housing and adding an adapter with a cone filter.
|
|
|
Re: air intake
[Re: toyT100]
#945921
05/24/09 06:40 AM
|
Joined: Aug 2003
Posts: 2,854
Roll Me Over
|
How bout this? I already have an K&N stock replacement filter, so will i get the same effect if I cut a hole in the upper side of the filter housing so the filter still does it's job? This would be instead of cutting a hole in the front of the housing and adding an adapter with a cone filter. Ok ok, search for the "deckplate mod".. i think gadget has it on his site www.gadgetonline.com as well as dyno graphs... check it out...
89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
|
|
|
Re: air intake
[Re: Greg_Canada]
#945922
05/24/09 11:04 PM
|
Joined: Sep 2007
Posts: 179
OP
Wheeler
|
haha yea i def typed before i though on this one!
I actually jus finished reading for bout 2 hrs strait about nothing but doing deckplate mods. Is adding a screen to the newly cut hole necessary or no?
|
|
|
|
