** Toyota 4.56 Gears Ring/Pinion **

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

** Toyota 4.56 Gears Ring/Pinion ** #947413 05/30/09 03:17 AM

Joined: Feb 2009

Posts: 35

Chico, Ca

NorCalT1

Getting the Wheeling Fever

Toyota OEM ring and pinion from a 1990 Toyota 4X4 pickup truck.
4.56 ratio for a 7.5" independent front suspension.
Gears were swapped out when the truck was new back in 1990. These gears probably have only 50 miles on them.
They are like new and donÆt have any cracks or chips.
These should work on all Toyota IFS model trucks and 4Runner's from 86-95. Also T100Æs 93-98.
$50+Shipping
Email for pic, i_egge@hotmail.com

Last edited by NorCalT1; 05/30/09 01:14 PM.

Moderated by 4x4Wire, code33, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 0.006s Queries: 14 (0.004s) Memory: 0.5832 MB (Peak: 0.6234 MB) Data Comp: Off Server Time: 2026-06-09 21:49:12 UTC
Valid HTML 5 and Valid CSS