I need the wiring passenger side wiring harness for the engine bay. It connects on the inside of the firewall via five connectors (I think) and two ground bolts. It has several plugs on the engine side but is easy to remove. I need the whole wiring harness (uncut) from inside the firewall to out in the engine bay. I got one of these from a PAP truck but made the mistake of giving up and cutting it at the firewall. I came back the next day and discovered how little would have been left on the inside. It is a pain, and less than desirable to splice this mess back in, thus my above request.

I also need the driver's side engine bay wiring harness. It is okay to cut the wires either just outside or just inside the firewall (Otherwise you'll have to remove most of the dash on the interior side. I've done this before, it's not fun.). This harness must be from a truck with variable speed intermittent wipers (not the two-speed intermittent wipers). I got one of these harnesses, whole thing inside and out, from a PAP truck. I didn't notice it only had the two-speed intermittent wipers. Argh!

I know this sounds demanding but it's what I need. I will trade for parts if I have something you need.

If you hear about a '91 at a PAP or some such, I would appreciate a heads-up. Thanks.

I have a 91 Montero LS that I'm about done with, the dash and engine are out. I think I can help you. PM me.

Russell

Here are some photos. Is the loom you describe this one?







Russell