Nope, still married to the same gal

hydra wrote Well that greese crap did not hold up very long!

Bought a new box ...and I wondered if I heard a new squeel!?!?


--------------------------------------------------------------------------------



( 69442 wrote, Was the wife agreeable to this )

hydras wife never squeels, giggles and laughs a lot but never squeels buts laughs even more <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" />

I heard when Hydra was born the doctor quickly announced ... it's a girl ... no wait, it's just a second belly button ... oh uh it's ... i'm sorry <img src="/forums/images/graemlins/lol.gif" alt="" />

Again, I apologize my friend <img src="/forums/images/graemlins/cheers.gif" alt="" />

Hydra,
Don't worry about that new box squealing.
My wife admitted to squealing the first few times too.
Then she said I had a baby D!{k, and the squealing ended.
Every new box is like that till they get worn in. Or tired of squealing.
Hope this info helps Bro???

UPDATE: So I finally cleaned out my box and the annoying squeal has gone away. Added bonus, I've noticed it smells much better now!

well good to hear you clean-out your own box, see what a good colon cleaning can do, but that is a different story the hydra squealing and laughing was about from his box, you know he is big and bad here, if we could only get his wife's email addy stories she would tell, <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/butwiggle.gif" alt="" />

My fan got noisy and quit working. I removed it, disassembled it, cleaned the ducts and cleaned the motor with electrical contact cleaner and compressed air. I then lubricated it and resintalled. It has worked flawlessly ever since.

Holy crap dude, wrong box <img src="/forums/images/graemlins/scared.gif" alt="" /> I was talk'n about the ol lady again <img src="/forums/images/graemlins/lol.gif" alt="" />

Seriously though, I disassembled it, clean it, lubed it and put it back together. Runs great and no more noise thanks to you guys <img src="/forums/images/graemlins/kewl.gif" alt="" />

...wow... I've been away for a few weeks and miss out on an epic thread. You guys are crazy! ROFL <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" />

Owned my sporty for 4 years from 68k mi's to 140K mi.. I've disassembled my blower motor twice and regreased it with silicone grease. This will make it last for about 1-2 years.. and the noise will usually come back in the fall/winter. I had the same problem.. that spray stuff is not thick enough to hold. you need thick grease. If left neglected it will lock up.. consensation gets in the bushings where they should've used bearings like all of them should but don't. <img src="/forums/images/graemlins/confused.gif" alt="" /> Anyway, you've gotta bench grinder with a wire wheel then wire wheel the corrosion off the ends of the axle. grease it more than kia did to deter futur corrosion. I had trouble getting it back together with so much grease because it made an airtight seal on the lower bushing. I'd press it in and it would pop back out due to air pressure.. I just drilled a small hole in the bottom of the blower motor housing to release the air pressure. This also will be my way of greasing the lower bushing next time it acts up.. WITHOUT disassembling the motor. It's tricky to do with the contacts an all but it can be done. I did it twice <img src="/forums/images/graemlins/smile.gif" alt="" />