|
|
|
|
Towbar with ARB Bullbar on 96 Tacoma
#979116
01/03/10 04:38 PM
|
Joined: Nov 2003
Posts: 52
OP
Getting the Wheeling Fever
|
Has anyone attached a towbar to their ARB Winch Bullbar? I have an ARB Bullbar mounted to my 1996 4x4 Extended cab Tacoma. Looks like one could attach a towbar where the D-Ring Shackles attach to the Bullbar to allow it to be towed by another vehicle. Are the shackle mount points spaced far enough apart to safely use a towbar in this manner? Any information or pictures of purchased/homemade towbars used in this fashion would be very helpful.
Regards, Ron
1996 Toyota Tacoma XCab 4x4 3.4L ARB Bullbar & Warn Winch Super Spring progressive leaf springs SuperBumper in rear 2" receiver Moderator Marks factory Bilstein shocks/Front Coils Albuquerque, NM
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 14 (0.004s) Memory: 0.5815 MB (Peak: 0.6213 MB) Data Comp: Off Server Time: 2026-06-20 19:16:33 UTCValid HTML 5 and Valid CSS