Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
10" DRUM BACKING PLATE #999583 06/10/10 08:36 PM
Joined: May 2007
Posts: 93
M
Mikewarme Offline OP
Getting the Wheeling Fever
Anybody out there have a backing plate left side for a Mighty Max pickup or ram50 from years 83-89 4wd? its the 10" brake setup. I confirmed with Mitsu its the same part for those years. Of coarse its no longer available from Mitsu.
Thanks Mike

Must be nice condition ill pay good money for it. Doing a frame off rebuild on a 85 power ram diesel

Re: 10" DRUM BACKING PLATE [Re: Mikewarme] #999584 06/11/10 06:04 AM
Joined: Feb 2005
Posts: 7,458
rxinhed Offline
Trail Leader
*****
I believe the backing plates are the same for the Mitsu trucks and Monteros to 1991. If so, I can offer you this part with the axle...that way I don't have to disassemble the part further.








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5861 MB (Peak: 0.6344 MB) Data Comp: Off Server Time: 2026-05-29 17:53:19 UTC
Valid HTML 5 and Valid CSS