Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Help with wheel/axle seal? #1009401 09/23/10 02:26 PM
Joined: Mar 2005
Posts: 59
Martini Offline OP
Getting the Wheeling Fever
Starting moderate restoration of my 86' Runner with IFS. I cannot find the seal that mounts on the steering knuckle and rides on the outer part of the wheel hub. I found some that fit the 88' thru 95', but not the 86'. Will the later style fit the 86? Toyota can get me them for a mere 40 dollars a piece...yeah. It looks like the Beck Arnley 0523487, but are the dims the same for an 86'?

Last edited by Martini; 09/23/10 03:43 PM.

86' 4Runner, Manual 22RE, Grey SR5
05' 4Runner 4WD Sport, Silver
Re: Help with wheel/axle seal? [Re: Martini] #1009402 09/24/10 01:03 AM
Joined: Apr 2002
Posts: 3,568
Snowtoy Offline
Roll Me Over
Toyota used the same IFS set-up from '86-'95(non-Tacoma) trucks, 4-Runners, and T100's, so they should work. You could double check with Toyota and ask to cross reference the numbers, but they should be the same.


More than tread lightly. Leave it like you were never there, nor anyone else.
'90 X-cab 4.88's 33 BFG AT's, rr ARB, Headers, Ignition upgrade, cold air induction.
'91 X-cab 5.29's 315's BFG MT's, rr ARB, custom bumper and flatbed

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5871 MB (Peak: 0.6351 MB) Data Comp: Off Server Time: 2026-06-07 04:49:23 UTC
Valid HTML 5 and Valid CSS