Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
97 rodeo 3.2 valve cover removal #1026907 04/19/11 09:07 PM
Joined: Apr 2011
Posts: 2
P
pnwboarder Offline OP
Need a Spot
a simple question, but i havent done it, do you need to remove the timing cover to completely remove the valve covers? im pulling the intake, as i have a coolant leak on back of the t-stat housing and figured while in there do the covers as well

Re: 97 rodeo 3.2 valve cover removal [Re: pnwboarder] #1026908 04/21/11 11:06 AM
Joined: Jul 2001
Posts: 345
I
isuzu95 Offline
Mudrunner
I trust you saw Jerry Lemond's reply on the other Isuzu forum?



Mike Murrell
'95 Rodeo - 3.2 liter - 2WD - Automatic
'04 Tacoma - 4 banger - Automatic







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.004s Queries: 15 (0.003s) Memory: 0.5839 MB (Peak: 0.6317 MB) Data Comp: Off Server Time: 2026-05-25 12:31:36 UTC
Valid HTML 5 and Valid CSS