Gen II 3rd row seats

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Gen II 3rd row seats #1027521 05/03/11 01:08 AM

Joined: Feb 2011

Posts: 7

San Francisco, CA

bastardo

Need a Spot

When I bought my Montero, the 3rd row came included but not installed.

I thought I had all the necessary plastic bits but not the screws/bolts. But then this image just confused me more...

[Linked Image]

What screw/bolt do I need? part 76689E or 76698B? Is there a suitable alternative that I could grab from Home Depot?

Thanks!

95 Montero SR - 35" BFG KM2, 2.5" Suspension Lift, 2" Body Lift

Re: Gen II 3rd row seats [Re: bastardo] #1027522 05/04/11 06:28 PM

Joined: Jan 2000

Posts: 16,227

Bay Area, CA

off-roader Offline

Web Wheeler

Quote

What screw/bolt do I need? part 76689E or 76698B? Is there a suitable alternative that I could grab from Home Depot?

Thanks!

IIWU, I'd go to a local pick and pull yard and just grab what you need. Alternatively, you can always check with a local Mitsu dealership (if there are any around up there).

As for a HD alternative... not if you want it to be safe. I don't believe they have large enough metric bolts. Even if they did you want to be sure they're rated to the correct metric grade. I'm not sure what the grade is on those mitsu bolts but someone else on here could probably tell you.

Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page

Re: Gen II 3rd row seats [Re: bastardo] #1027523 05/05/11 12:27 AM

Joined: Feb 2005

Posts: 1,511

Phoenix, AZ

ryany

Body Damage is Cool

Quote

What screw/bolt do I need? part 76689E or 76698B?

Although the diagram is not all that clear about where there bolts go, I think you're looking for 76698B. The 76689E is a smaller screw that holds the plastic trim piece and the rubber bump stop in place.

95 Montero SR
3.8 MIVEC, Advance headers, 2 1/2" exhaust, Magnaflow muffler, OME shocks & rear springs, 2" body lift, 3" tank lift, 4.90s, TRE front locker, factory rear locker, Roger Brown Rock Sliderz, 315/75r16 (35") tires, Sport big brakes

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: