Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Solid Axle Knuckle Alignment SST #1035897 10/12/11 01:59 AM
Joined: Jun 2000
Posts: 1,002
carter Offline OP
Body Damage is Cool
Anyone in the Los Angeles/Orange County Cali area have a solid axle knuckle alignment tool that I can borrow or rent?

TIA!

Mike


Mike Carter
85 & 86 4Runners

My Website
Re: Solid Axle Knuckle Alignment SST [Re: carter] #1035898 10/18/11 04:37 AM
Joined: Jan 2002
Posts: 1,617
matts Offline
Body Damage is Cool
Correct me if I'm wrong. Doesn't it take two tools (SSTs), a scriber that mounts in the axle where the axle oil seal normally sits and a dummy shaft that sits in the knuckle bearings? I've never seen anybody actually carry out this procedure. I admire you for trying to do it right. -- Matt


'89 4runner SR5, 3.0, auto (fun)
'93 xtra cab, dlx,3.0, 5spd (work truck)

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5862 MB (Peak: 0.6339 MB) Data Comp: Off Server Time: 2026-05-25 14:43:19 UTC
Valid HTML 5 and Valid CSS