|
|
 GenII air locker in Charlotte pull a part
#1036691
10/23/11 01:56 PM
|
Joined: Apr 2006
Posts: 3,607
OP
Roll Me Over
|
Just in case someone is looking for one with 4.636 gears. I took the switch and the pump, but will pass on if someone wants to pull the axle and have to full kit. It's been there since late August so it probably won't be there much longer. It's pretty well picked. Would be a bummer to see that axle in the crusher.
'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...
|
|
|
Re: GenII air locker in Charlotte pull a part
[Re: Mad_Scientist]
#1036692
10/24/11 12:41 AM
|
Joined: Jul 2009
Posts: 1,342
Body Damage is Cool
|
I Might get it, You wanta lend a hand get it off? Thanks for the heads up What size wrenches and sockets are needed on the trailing arms?
91 Montero LS "Sandstorm", Auto, Dual Bouncy Seats, 2" Suspension lift, 2" Body Lift, GENII front IFS, 32" MT tires
89 Raider "Trailbreaker", 3.0, Auto, Dual Bouncy Seats
|
|
|
Re: GenII air locker in Charlotte pull a part
[Re: RECON45]
#1036693
10/25/11 01:12 AM
|
Joined: Apr 2006
Posts: 3,607
OP
Roll Me Over
|
Might be able to early on saturday morning. I don't think you need anything bigger than 24mm. It's not a lot to do, just blinkin heavy <img src="/forums/images/graemlins/mrt.gif" alt="" />
'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...
|
|
|
Re: GenII air locker in Charlotte pull a part
[Re: Mad_Scientist]
#1036694
10/25/11 01:18 AM
|
Joined: Aug 2009
Posts: 396
Mudrunner
|
A battery powered impact wrench & sawzall may be a good addition ....not mandatory though. <img src="/forums/images/graemlins/kewl.gif" alt="" />
Va_Stumpy
89 Raider
"Never judge horsepower by exhaust"
3.0
automatic
stock as a rock
Dual Bouncy Seats
|
|
|
Re: GenII air locker in Charlotte pull a part
[Re: Va_Stumpy]
#1036695
10/25/11 01:42 AM
|
Joined: Jul 2009
Posts: 1,342
Body Damage is Cool
|
not allowed to have sawzaw in this yard. I will be out of town this weekend. i am going to try going tomorrow
91 Montero LS "Sandstorm", Auto, Dual Bouncy Seats, 2" Suspension lift, 2" Body Lift, GENII front IFS, 32" MT tires
89 Raider "Trailbreaker", 3.0, Auto, Dual Bouncy Seats
|
|
|
Re: GenII air locker in Charlotte pull a part
[Re: RECON45]
#1036696
10/25/11 03:12 AM
|
Joined: Apr 2006
Posts: 3,607
OP
Roll Me Over
|
Good luck. They will help you transport the axle out of the yard to your truck. You probably know that <img src="/forums/images/graemlins/kewl.gif" alt="" />
'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...
|
|
|
Re: GenII air locker in Charlotte pull a part
[Re: Mad_Scientist]
#1036697
10/25/11 03:55 AM
|
Joined: Jul 2009
Posts: 1,342
Body Damage is Cool
|
yeah but I was just going to pick it up and toss it in my pocket. <img src="/forums/images/graemlins/scared.gif" alt="" /> I downloaded the fsm to tear it down but I did not know the size of the bolts. I got impacts up to 24mm. It was not too rusty was it? That will make things easier. At least tomorrow is going to be great weather and temperature.
91 Montero LS "Sandstorm", Auto, Dual Bouncy Seats, 2" Suspension lift, 2" Body Lift, GENII front IFS, 32" MT tires
89 Raider "Trailbreaker", 3.0, Auto, Dual Bouncy Seats
|
|
|
Re: GenII air locker in Charlotte pull a part
[Re: RECON45]
#1036698
10/25/11 10:26 AM
|
Joined: Apr 2006
Posts: 3,607
OP
Roll Me Over
|
yeah but I was just going to pick it up and toss it in my pocket. So manly <img src="/forums/images/graemlins/mrt.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/lol.gif" alt="" /> Rusty? No, don't think so, but I didn't look too closely. At least one brake caliper is missing on the pass side. I didn't notice any damage to the truck so I guess someone traded it in. Shame. Good luck.
'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...
|
|
|
Re: GenII air locker in Charlotte pull a part
[Re: RECON45]
#1036699
10/25/11 11:17 AM
|
Joined: Feb 2004
Posts: 10,238
Web Wheeler
|
not allowed to have sawzaw in this yard. A battery powered sawzall is ok. I've been wondering when you guys would discover the locker. <img src="/forums/images/graemlins/kewl.gif" alt="" /> Frank
'89 [color:"white"]G-Raider[color:"white"] [color:"black"]Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 172k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, Lifeline AGM, Rust-Oleum
|
|
|
Re: GenII air locker in Charlotte pull a part
[Re: FrankR]
#1036700
10/25/11 03:29 PM
|
Joined: Apr 2006
Posts: 3,607
OP
Roll Me Over
|
I've been wondering when you guys would discover the locker. <img src="/forums/images/graemlins/kewl.gif" alt="" />
Frank You still at the Charlotte yard Frank? Any idea how long that Montero will be there for? It's been a little while <img src="/forums/images/graemlins/cheers.gif" alt="" />
'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...
|
|
|
|
