|
|
|
|
 Oxy sensor wire question
#1036824
10/25/11 11:35 PM
|
Joined: Nov 2007
Posts: 241
OP
Wheeler
|
Anyone know if the original oxy sensor wire on the 85-86 truck was cloth covered?The one in my truck is at present and am curious if this could be a very old sensor.
|
|
|
Re: Oxy sensor wire question
[Re: dave1223]
#1036825
10/27/11 11:42 PM
|
Joined: Feb 2008
Posts: 86
Getting the Wheeling Fever
|
I own a '94 and I noticed something similar on both of my 02 sensors. I think what your seeing is a form of heat shielding that is needed for the wires leading from the sensor. Because of their close proximity to the exhaust this is needed. As far as dating the sensor based on this, I don't think that is possible.
|
|
|
Re: Oxy sensor wire question
[Re: dave1223]
#1036826
10/27/11 11:50 PM
|
Joined: Nov 2007
Posts: 241
OP
Wheeler
|
|
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5929 MB (Peak: 0.6458 MB) Data Comp: Off Server Time: 2026-05-30 00:03:58 UTCValid HTML 5 and Valid CSS 
